Resideo VISTA-20P VISTA Control Panel




Supports four graphic touchscreen keypads. Wireless keys can be programmed without using zones. Two low current on-board trigger outputs. Latchkey reports to pagers. User access time windows. Dynamic Signaling. 16 output devices.

The high capacity, feature-rich VISTA-20P lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet Internet or 4G communicator can be installed in premises without TELCO lines. The panels installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.


  • IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
  • Supports four graphic touchscreen keypads
  • Wireless keys can be programmed without using zones
    • 40 hardwire expansion zones
    • 40 wireless expansion zones
  • Two low current on-board trigger outputs
  • 100 Event Log viewable at system keypads with time/date stamp
  • 48 system user codes assignable to either partition
  • Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
    • Global Arming from any system keypad
    • Go to function to view or operate one partition from the other
    • Separate partition account numbers
  • 16 output devices
    • Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
  • Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
  • Supports four-wire and up to 16 two-wire smokes
    • Works with Sentrol CleanMe maintenance signal
  • Multiple actions on output devices depending on system state
    • Turns lights off when system arms
    • Turns the same light on when system disarms
    • Flashes same lights when system is in alarm
  • Built-in phone line cut monitor with programmable delay and annunciation options
    • Display on system keypads
    • Trigger local sounders
    • Trigger system bell

Security Dealer Features

  • Automatic System Load Shed
    • During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
  • Dynamic Signaling
    • Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio

Valuable End-User Features

  • Viewable on system keypads:
    • Exit countdown
    • Time and date display*
    • Event log*
  • Auto keypad backlighting on entry
  • Keyswitch arming
  • Programmable macro buttons and single-button arming
  • Supports a variety of wireless remote controls for single-button operation
  • User Scheduling
    • Latchkey reports to pagers
    • Auto arm/disarm
    • "User access time windows
  • VIP Module allows system control from any touchtone phone
  • Chime by zone

*Requires custom alpha keypad

ElectricalAux. power 12 VDC, 600mA maximum
Seven hour standby at 400mA aux. load
with four amp hour battery
16.5 VAC/25 VA transformer
Alarm output 12 VDC, 2.0 amps max.
For UL installations, combined aux. and
alarm output cannot exceed 700mA
Output ControlSupports up to four relay boards (up to 16 relays)
Optional X-10 transformer/interface (part no. 4300) may be used to control up to 16 X-10 receiving devices
ZonesEight hardwired zones
(15 with zone doubling)
Selectable response 10msec, 350msec,
Assignable to any partition
20 selectable zone types plus four
configurable zone types
Programmable swinger suppression
Expansion Devices4219 ? Eight hardwired zones ? 16mA
4204 ? Up to four relays ? 15mA standby (each active relay draws an additional 40mA)
4229 ? Eight hardwired zones and two relays ? 36mA (each active relay draws an additional 40mA)
AccessoriesiGSMV4G Internet and Digital Cellular Communicator with Remote Service Capability
7845i-ENT Enterprise Internet Communicator
GSMV4G Digital Cellular Communicator with Remote Service Capability
GSMX4G Digital Cellular Communicator for VISTA Control Panels
5881ENL RF Receiver supports up to eight zones ? 60mA
5881ENM supports up to 16 zones ? 60mA
5881ENH supports up to 48 zones ? 60mA
5883 Transceiver supports up to 40 zones ? 80mA
Keypads6160 Custom Alpha Security Keypad ? 40mA/120mA
6160V Voice Custom Alpha Security Keypad ? 60mA/190mA
6160RF Custom Alpha Receiver/Security
Keypad ? 120mA/210mA
6150 Fixed-English Security Keypad ? 40mA/70mA
6150V Voice Fixed-English Security Keypad ? 60mA/190mA
6150RF/6150RFFR Fixed-English/French
Receiver/Security Keypad ? 80mA/105mA
6151ZN/6151ZNFR Fixed-English/French
Security Keypad with Hardwired Zone ? 35mA/80mA
6148 Fixed English LCD ? 30mA/55mA
6280 Color Graphic Touchscreen Keypad
with Voice
Tuxedo Touch (TUXWIFIW) Color Graphic
Voice Touchscreen Security Keypad with
232 Z-Wave device and 32-camera support
Agency Listings: 
UL listingResidential Fire and Burglary: ? Household Fire Warning System Units ? ANSI/UL 985, 2000/05/26 (5th edition) with revisions up to 2004/04/29
Smoke DetectorsSupports up to 16 two-wire smoke detectors
Supports four-wire smoke detectors
Supports the 5800COMBO Smoke and Carbon Monoxide Detector
CommunicationsLTE-XV and LTE-XA Digital Cellular Communicators with Remote Service Capability
iGSMV4G Internet and Digital Cellular Communicator with Remote Service Capability
7847i-E Enterprise Internet Communicator
7847i AlarmNet Internet Communicator
GSMV4G Digital Cellular Communicator with Remote Service Capability
GSMX4G Digital Cellular Communicator for VISTA Control Panels
Touchtone or pulse
Formats supported
ADEMCO 4 + 2 Express
ADEMCO low speed
3 + 1, 4 + 1 and 4 + 2 reporting
Reporting capabilities
Split/Dual ? True dial tone detection
Low battery reports 11.2 ? 11.6 VDC
AC loss and restoral reporting supported

Manuals & Technical Documents

This download is available in more than one file format. Please select the file format you want to download.

Pending Reviews