A/V Distribution That Works
Distribute your Audio/video content throughout your home without any fuss. Our lineup of HD video extenders, matrix switchers and other video solutions will work quietly and consistently in the background to preserve the elegance of the home.
Matrix Switchers
8x8 HDMI
MX88-4KUHDE
8x8 HDMI Matrix with HDMI 2.0 and HDCP 2.2 compatibility and allows eight sources to be shown or switched to any of the eight displays simultaneously. MX88-4KUHDE also provides analog and digital audio de-embedding for every HDMI output.
- 8 HDMI Input x 8 HDMI Output
- Support video source up to [email protected] 4:4:4 8bit
- Third party control drivers for Control 4, RTI, URC and Elan
- Compatible with 4K HDR10 and Dolby Vision
- Extracts HDMI two-channel PCM audio to an unbalanced analog audio output that can be routed and sent to any other analog output channel, independent of video routing
- Extracts a Digital Audio Stream from the HDMI input to the Digital Output up to and including Doby 5.1 and DTS 5.1 streams. Each De-embedded audio stream can be routed and sent to any of the 8 digital audio output channels, independent of video routing
- Includes a convenient handheld IR remote control
- Supports 2 channel or 5.1 multi-channel PCM, Dolby Digital and DTS Digital Surround
- Rack mountable 1U, full-rack width enclosure
- 3 year warranty
4x4 HDMI
MX44-4KUHDE
4x4 HDMI Matrix with resolutions supported up to [email protected] 4:4:4 8bit and HDCP 2.2 compatibility. It allows four sources to be distributed or switched to four HDMI displays simultaneously. MX44-4KUHDE also provides de-embedded analog audio output from each HDMI output.
- 4 HDMI Input x 4 HDMI Output
- Support video source up to [email protected] 4:4:4 8bit
- Third party control drivers for Control 4, RTI, URC and Elan
- Compatible with 4K HDR10 and Dolby Vision
- Extracts HDMI two-channel PCM audio to an unbalanced analog audio output that can be routed and sent to any other analog output channel, independent of video routing
- Extracts a Digital Audio Stream from the HDMI input to the Digital Output up to and including Doby 5.1 and DTS 5.1 streams. Each De-embedded audio stream can be routed and sent to any of the 8 digital audio output channels, independent of video routing
- Includes a convenient handheld IR remote control
- Supports 2 channel or 5.1 multi-channel PCM, Dolby Digital and DTS Digital Surround
- Rack mountable 1U, full-rack width enclosure
- 3 year warranty
4x4 HDMI
MX44-4KUHDE
The MX44-4KECO is a 4x4 compact HDMI matrix switcher, specially designed for cost conscious projects and buyers. It features not only basic functions like cross-point switching and control (IR, RS-232, IP), but also advanced functions like auto-downscaling for each HDMI output when it is connected to 1080P display. There is SPDIF audio breakout for each HDMI output, so as to provide more audio feeds to multi-zone audio system.
- 4 HDMI Inputs and 4 HDMI Outputs.
- All HDMI inputs and outputs support HDMI with HDR formats incl., HDR 10, HLG, DOLBY VISION up to 4K60 444.
- HDCP2.2 compliant
- With built-in 4K-1080P downscaler for each HDMI Output, the matrix can downscale 4K 60Hz 444 to [email protected] 444. 4K downscaler can work automatically when the matrix is connected to 1080P display and can be set to ON/OFF by API commands.
- Each HDMI output has a SPDIF audio breakout, and supports formats up to 5CH HBR or 2CH PCM audio.
- Supports smart EDID, each input can be assigned to smart EDID mode.
- Supports EDID presets, EDID copy and EDID write. By default, each input EDID is set as 4K60 444 HDR with 5.1CH encoded audio.
- Supports audio mute, four SPDIF outputs can be muted separately by API commands.
- Rich control options, include RS-232, IR, web UI and front panel buttons
Converters, Switchers, and Splitters
The Swiss Army Knife
Extractor / Manager
HDMI-SWISS
- Support video source up to [email protected] 4:4:4 8-bit and HDCP 2.2.
- HDMI audio de-embedded out with Digital Coaxial and Analog Stereo.
- Rotary switch for EDID Management with 15 EDID presets.
- Built in CEC controller from HDMI out.
- Built in RS232 controller, to pre-load and store RS232 command of synced device.
- Built in RELAY control to automatically turn Projector Screen ON/OFF, by detecting input signal status.
Digital to Stereo
Analog Audio Converter
DAC.2
- Digital to Analog: Converts Coaxial or TOSLINK digital audio signal (PCM) to stereo analog audio signal
- Multi-input: S/PDIF TOSLINK and Coaxial inputs.
- Multi-output: R/L RCA and headphone analog audio outputs.
- High Sampling Rate: 32KHz/ 44.1KHz/ 48KHz/ 96KHz.
- High Resolution: 24-bit S/PDIF incoming bit stream.
- Easy to Use: Easy to install, plug and play.
View
4x1 HDMI
Switcher (4:4:4)
SW4X1-4KUHD
- 4x1 4K HDMI switcher
- Fully compliant with HDMI 2.0 and HDCP 2.2
- HDMI inputs and output support up to [email protected] 4:4:4 8bit
- HDMI input and output cable length up to 49ft/15m + 49ft/15m for 1080P, and up to 10ft/3m + 16ft/5m for [email protected] 4:4:4
- 4:4:4, HDR Compliant, IR Remote, IR Receiver
- IR remote included
- Supports top panel button, IR remote and automatic switch control options
View
1x4 HDMI
Splitter (4:4:4)
SP1X4-4KUHD
- 1x4 4K HDMI Splitter
- Supports resolutions up to [email protected]
- 4:4:4 8bit, HDR and HDCP 2.2 compliant
- Each HDMI output supports scaling down to 1080P individually (fps will not change during scaling down from 4K to 1080P)
- Automatic input cable equalization for signal regeneration compensation
- Mounting tabs included
View
Extenders
70M HDR HDBaseT
Extender with ARC
EXT70-4KUHDE
- 4x1 4K HDMI switcher
- 4K/UHD capability @60 Hz with 4:4:4 Chroma sampling, plus support for HDR formats.
- HDCP 2.2 compliant.
- Supports HD signal transmission up to 100 meters (1080p) and 70 meters ([email protected] YUV 4:4:4) via a single Cat 5e/6 cable.
- Supports HD signal transmission up to 100 meters (1080p) and 100 meters ([email protected] YUV 4:4:4) via a single Cat 6a/7 cable.
- Receiver to transmitter audio return via ARC or optical coax pathway
- HDMI audio de-embedding with phoenix analog connector
- Extends RS232, IR and Ethernet control signals.
- Automatic EDID management.
40M HDR HDBaseT
Extender 4:4:4
EXT40-4KUHD
- Resolution up to [email protected] 4:4:4, HDR, HDCP 2.2 compliant
- Supports HDR (High Dynamic Range) format
- Over a Cat 6a/7 cable, HDMI signal transport up to 230ft (70m) at 1080P and 131ft (40m) at [email protected] (4:4:4)
- Over a Cat 5e/6 cable, HDMI signal transport up to 197ft (60m) at 1080P and 115ft (35m) at [email protected] (4:4:4)
- Bi-directional PoCC, one power supply at either transmitter or receiver side can power both units
- Supports bi-directional IR/RS232 pass through
- Slim profile, space saving and easy-to-install
View
40M HDR HDBaseT
Extender 4:2:0
EXT40-4K
- 40m 4K HDMI UTP Extender
- Supports resolutions up to [email protected] 4:2:0 8bit and HDCP 2.2
- Over a Cat 6a/7 cable, extends [email protected] 4:2:0 8bit up to 40m/130ft and 1080P up to 70m/230ft.
- Over a Cat 5e/6 cable, extends [email protected] 4:2:0 8bit up to 35m/115ft and 1080P up to 60m/200ft.
- HDCP 2.2, Bi-directional IR & RS232 Pass Through
- Bi-directional PoC
- Supports multichannel audio up to PCM 7.1, Dolby True HD, DTS HD Master Audio, Dolby Atmos and DTS:X
- Maximum Data Rate: 10.2 Gbps
View
40M HDMI [email protected]
Extender 4:4:4
EXT40-4KECO
- Supports resolution up to [email protected] 4:4:4 8bit
- HDMI signal transport up to 40m / 131ft along a CATX cable
- Support HDMI 1.4b and HDCP 1.4
- Bi-directional IR pass through
- Auto equalization built-in for optimal signal transmission
- Built-in ESD: ±8kV (air-gap discharge) & ±4kV (contact discharge)
- Slim profile, cost-effective and easy-to-install