Converters & Scalers

Digital S/PDIF to analog audio converter. It can convert multichannel digital audio to stereo analog audio. It features one optical and one coaxial digital S/PDIF inputs up to PCM 5.1 channel to 2 analog outputs simultaneously on the 3.5mm headphone and the L/R RCA connector. MC/40 ***MSTR BRAND FAMILY OF PRODUCTS

Converts digital signal (PCM) to analog. Digital to Analog converter PCM ONLY. Supports Optical & Digital Coax inputs. Stereo RCA output

HDMI Audio extractor/controller. HDMI audio de-embedded digtal coax and analog stereo outputs. CEC/RS232 commands to power to on/off projectors/displays built in relays for screen/lift control. ***MSTR BRAND FAMILY OF PRODUCTS

Capable of extending UHD/4K and 1080p resolution up to 75 ft. / 23 m. in and 75 ft. / 23 m. out (150 ft. / 46 m. total) extension. Resolves common HDMI integration obstacles such as HDCP, EDID, HPD, and audio breakout HDMI correction. Supports all SD, HD, and VESA resolutions up to Ultra HD/4K, 3D and 1080p/60 (60Hz & 50Hz) resolution support. Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4 or 60Hz at 4:2:0 4K/Ultra HD. Compliancy up to HDCP 2.2 HDCP 2.2. Capability to pass 3D stereoscopic signal formats 3D ready.

Extend optical and coaxial digital audio signals up to distances of 300m over a single CAT cable. Transmitter receives power over the CAT cable. Supports LPCM/ DTS/ Dolby Digital and Dolby Digital plus when used as a straight digital in/digital out extender. Supports sample rates 32kHz/ 44.1kHz/ 48kHz/ 96kHz and 192kHz up to 24-bit resolution. Ultra low jitter and high fidelity design. Plug-and-play. Small compact size.

CABL

ea.

1 RS232 port for control. 1 IR Learning Eyeon the front. 4 IR Blaster 3.5 mm ports. 4 IR Confirmation LEDs. DC5V 1.5A positive tip power supply. Major Control System Drivers. Easy integrated control from any 2G/2G+ command console.

Tiles up to four 4K/lower source devices on single screen. Variety of viewing modes. Any Transmitter in 3G system can be input to the Tiler. Distribute Tiled video to any Receiver in 3G system. 3G+ 4+ Tiler 4 Input Tiling Processor. MC5.

Resolves common HDMI integration obstacles related to Hot Plug Detection/ EDID handshaking/ HDCP authentication/ and bandwidth HDMI correction. HDMI input audio is de-embedded on an analog 3.5mm stereo and digital PCM connector audio de-embedding. Incoming 18Gbps bandwidth HDMI signals may be down-converted for integration with existing 10.2Gbps systems/infrastructure 18G down-convert. Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth) Ultra HD/4K. Fully licensed and compatible with HDCP 2.2 HDCP licensing. More life-like images through a greater range of luminance levels HDR10 and Dolby Vision. Supports all SD/ HD/ and VESA (VGA/ SVGA/ XGA/ WXGA/ SXGA/ UXGA) up to 4096 x 2160p resolution support. Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit deep color support.

VGA video and analog audio to digital HDMI video and audio. Incoming analog audio onto the HDMI output. VGA resolutions to 720p or 1080p. Simple switching between 720p and 1080p up-scaling.

Full HD 1080p video transmission. Stereo/Multi-channel audio supported. Built-in video wall support. 3D Support. Integrated RS232 port. Image Push/Pull/Freeze supported. OSD messaging. MC5.

CONVERTE

COMPONENT TO HDMI CONVERTER

Pass-Through

VGA TO HDMI CONVERTER

ea

EA.

Gateway

Connects to RS232 port on a Receiver or Transmitter Converts RS232 into an IR signal Compatible with Pronto and Global Cache IR codes Conveniently powered through Receiver USB port