Commercial

Multi-Conductor unshielded. Low smoke. PVC insulated. Stranded bare copper conductors. Ripcord & sequential foot markings printed on jacket. White. 1000 Spool. Each.

Easy to work. 4C/22 AWG. 2/4 stranded bare copper conductors. 500ft lengths. Tangle-proof. Wire pulls through middle of coil pack. Can stack coil packs/pull mulatiple wires in parallel. For faster installation. UL & Riser Rated. BLUE. Each.

Freespace 360P Series II environmental loudspeaker. 360-P II in-ground loudspeaker green. Full-range environmental loudspeaker with one downward firing 4.5in advance composite environmental full-range driver for in-ground or above-ground mounting. Domed port grille reflects sound into the listening area for clear consistent performance. Cabinet shape acts as acoustic diffuser directing mid- and high-frequency energy out towards listeners. Base of the loudspeaker acts as a tuned multi-chambered ported enclosure. Multi-tap line transformer provides easy-to-change tap settings. Tamper-resistant design. Internal speaker protection circuit safeguards drivers.

Six input mixer. 4x mic/line. 1x page. 1x direct input. Two powered outputs. Mixer/ dual mono/ stereo modes. 70/100V capable. Easy setup with on-board controls. Loudspeaker EQ & Dynamic EQ DSP. Opti-voice paging system. 24 VDC power backup. Limited 5-year warranty.

Transformer for 70170

785403-0110 4 channels with combi mic/line inputs and phantom power. ToneMatch digital output for Bose L1 Model II and L1 Model 1S speaker systems. 1/4in aux outs (x2). 1/4in aux ins (x2). 1/4in stereo main outs. Power supply not included - powered via ToneMatch port.

Adaptable power amplifier delivers 400 watts. Total amplifier power is shared across all output channels. Support for both low and high impedance loads up to 100V. Configurable loudspeaker processing. With the inclusion of AmpLink up to 24 digital audio channels can be sent to the amp from a Bose DSP via a shielded CAT 5 cable.

Adaptable power amplifier delivers 600 watts. Total amplifier power is shared across all output channels. Support for both low and high impedance loads up to 100V. Configurable loudspeaker processing. With the inclusion of AmpLink up to 24 digital audio channels can be sent to the amp from a Bose DSP via a shielded CAT 5 cable.

Passive summing cable for AA Series amplifiers. 3' (1m) Cable with two Male RCA connectors. Uses 3 Resistor Network to Sum Stereo Audio Signals to Mono.

P/N 7801H00120

P/N 3095H00290

P/N 3165H00250

BAND 7

BAND 8

1)