Send 4K & 1080p HDMI over 1GB network using our reliable encoders & decoders.
This new series natively supports 4K60 in and out, allowing end users to play High Dynamic Range video, including Dolby Vision and HDR10+ formats, using the growing number of Ultra 4K sources and devices.
Use MaxColor™ 4K60 Transmitters and Receivers to create your new system, or bridge them to a 3G Ultra system to support a variety of source and screen formats.
MC-TX1 (POE)
MaxColor 4K60 Transmitter
- Supports all lossless audio formats
- Supports deep color up to 12-bit
- HDR10, HDR10+, HLG and Dolby Vision
- Control endpoints with CEC, IR, RS232
- View a live MJPEG stream up to 30fps
- View a snapshot image in any web browser or control system, at up to 10 fps
- Can run parallel and or be bridged with a 3G Ultra system. Bridging requires additional hardware
- Computer and video resolution 4K/60 @ 4:4:4
MC-RX1 (POE)
MaxColor 4K60 Receiver
- Supports all lossless audio formats
- Supports deep color up to 12-bit
- HDR10, HDR10+, HLG and Dolby Vision
- Control endpoints with CEC, IR, RS232
- View a live MJPEG stream up to 30fps
- View a snapshot image in any web browser or control system, at up to 10 fps
- Display a custom logo or message as an overlay on any active screen
- Load a custom default image or logo for when no source is displayed onscreen
- Can run parallel and or be bridged with a 3G Ultra system. Bridging requires additional hardware
- Computer and video resolution 4K/60 @ 4:4:4
- Video wall support
Build a 4K & Ultra HD matrix using the Third Generation of Just Add Power Transmitters and Receivers. Distribute HDCP 2.2 content to multiple displays HDMI 2.0 or otherwise over a 1Gb network. The built-in scaler on the Receiver allows for seamless display on both 1080p and 4K screens. Mix and match 3G, 3G+AVP, 2GΩ/3G, and 2GΩ/3G+ models to get the exact feature set needed.
VBS-HDIP-707POE (POE)
VBS-HDIP-747POE (Rackmount) 
3G Transmitter
- Encodes a 4K or lower source device into IP & sends over the network
- Supports HDCP 2.2
- 23 ms ultra low latency
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
707POE devices produced in 2021 and later are NOT compatible with 2G systems because of updated hardware. It can only be installed in 3G systems.
2G systems that need to expand should use the 705POE or 715POE instead.
VBS-HDIP-708POE (POE)
3G Transmitter with Stereo Out
- Encodes a 4K or lower source device into IP & sends over the network
- Supports HDCP 2.2
- 23 ms ultra low latency
- Stereo audio output 3.5mm
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
708POE uses updated hardware that makes it INCOMPATIBLE with 2G systems. It can only be installed in 3G systems.
2G systems that need to expand should use the 705POE or 715POE instead.
VBS-HDIP-717HIFI (POE)
3G+HIFI Transmitter
- Encodes a 4K or lower source device into IP & sends over the network
- Supports HDCP 2.2
- 23 ms ultra low latency
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
- Local HDMI loopout
VBS-HDIP-718KVM (POE)
VBS-HDIP-749KVM (Rackmount) 
3G+KVM Transmitter
- Encodes a 4K or lower source device into IP & sends over the network
- Supports HDCP 2.2
- 23 ms ultra low latency
- Image Pull
- Instant-Seamless switching
- Power over Ethernet
- USB 2.0
- KVM Supported
- Stereo audio output 3.5mm with adjustable delay
- RS232, IR*, and CEC control of sources
VBS-HDIP-767DSS (POE)
3G+ DANTE Sound System Transmitter
- Encodes a 4K or lower source device into IP & sends over the network
- Supports HDCP 2.2
- 23 ms ultra low latency
- LPCM audio up to 8 channels
- Input HDMI audio into Dante(R) or AES67 systems
- Extract Dante or AES67 audio for distribution to any Receiver
- Local HDMI Loopout
- RS232 or IR* control of sources
VBS-HDIP-759A (Rackmount)
3G+4+ Video Tiling Processor
- Tiles up to four 4K or lower source devices on a single screen
- Variety of viewing modes
- Any Transmitter in the 3G system can be input to the Tiler
- Distribute Tiled video to any Receiver in the 3G system
- Additional Tilers allow for more sources on the same display
VBS-HDIP-737POE(POE)
3G Warp Engine Transmitter
- Rotates a single 4K or lower source up to 360 degrees
- Receiver and Transmitter combined into one unit
- Receiver accepts video from any Transmitter in the system
- Transmitter outputs rotated video to any Receiver in the system
VBS-HDIP-709P2P(POE)
3G Point-to-Point Transmitter
- Designed Specifically for Point-to-Point (No Switch) Installations
- Ideal for a Single Source 4-Screen Video Wall
- Encodes a 4K or lower source device into IP
- Supports HDCP 2.2
- Supports multi-channel including high-resolution digital audio formats
- 23 ms ultra low latency
- 40 Watt PoE Injector to power up to four (4) Just Add Power 509POE Receivers
- RS232 Pass-thru for End-point control
- 10 - 16 Volts, 20 Watts minimum
- No Power Supplies are included with this device
VBS-HDIP-707WP2(POE)
3G 2-Gang Wallplate Thin Transmitter
- Encodes a 4K or lower source device into IP & sends over the network
- HDMI input
- Standard faceplate available in black or white - custom colors also available
- Supports HDCP 2.2
- 23 ms ultra low latency
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
VBS-HDIP-717WP2(POE)
3G+ 2-Gang Wallplate Transmitter
- Encodes a 4K or lower source device into IP & sends over the network
- HDMI, VGA, and 3.5mm Line-In Inputs
- Standard faceplate available in black or white - custom colors also available
- Supports HDCP 2.2
- 23 ms ultra low latency
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- USB 2.0
- KVM Supported
VBS-HDIP-718WP4(POE)
3G+ 4-Gang Wallplate Transmitter
- Encodes a 4K or lower source device into IP & sends over the network
- HDMI, VGA, and 3.5mm Line-In Inputs
- Standard faceplate available in black or white - custom colors also available
- Supports HDCP 2.2
- 23 ms ultra low latency
- Image Pull
- Instant-Seamless switching
- PoE
- Dolby DSP - Re-encode Dolby Digital 5.1 as Dolby Pro Logic II for HDMI distribution to both multi-channel and stereo audio zones
- Two analog audio inputs mixable with HDMI audio
- Stereo audio output 3.5mm with adjustable delay
- RS232 or IR* control of sources
- CEC control of sources
- USB 2.0
- KVM Supported
- Local HDMI loopout
2GΩ/3G devices fit seamlessly into a 1080p or 4K matrix. Add a VGA, SDI, TVI or HDMI 1080p source to a 4K system; expand a legacy 2G system; or build a new 1080p system with all the latest features.
Distribute HDCP 1.4 content to multiple HDMI displays over a 1Gb network. The built-in scaler on the Receiver allows for seamless display on both 1080p and lower screens. Mix and match 3G, 3G+AVP, 2GΩ/3G, and 2GΩ/3G+ models to get the exact feature set needed.
VBS-HDIP-705POE (POE)
2G/3G 1080p Transmitter
- Compatible with both 2G and 3G systems
- Encodes a 1080p or lower source device into IP & sends over the network
- Supports HDCP 1.4
- 23ms ultra low latency
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
VBS-HDIP-715POE (POE)
2G/3G+ 1080p Transmitter
- Compatible with both 2G and 3G systems
- Encodes a 1080p or lower source device into IP & sends over the network
- Supports HDCP 1.4
- 23ms ultra low latency
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
- CEC control of sources
- USB 2.0
- KVM Supported
- Stereo audio out 3.5mm with adjustable delay
- Local HDMI loopout
VBS-HDIP-725POE (POE)
2G/3G+ SDI Transmitter
- Encodes up to 1080p resolution source SDI device into IP & sends over the network.
- Support for SD-/HD-SDI formats
- Stereo output with audio delay
- Local HDMI Loopout
- Null Modem-integrated RS232
- Fully compatible with all 2G & 3G models and viewable on any Receiver
VBS-HDIP-726TVI (POE)
2G/3G+ TVI Transmitter
- Encodes up to 1080p resolution source TVI device into IP & sends over the network
- Analog audio input
- Local HDMI Loopout
- USB 2.0
- KVM Supported
- Fully compatible with all 2G & 3G models and viewable on any Receiver
Build a 4K & Ultra HD matrix using the Third Generation of Just Add Power Transmitters and Receivers. Distribute HDCP 2.2 content to multiple displays HDMI 2.0 or otherwise over a 1Gb network. The built-in scaler on the Receiver allows for seamless display on both 1080p and 4K screens. Mix and match 3G, 3G+AVP, 2GΩ/3G, and 2GΩ/3G+ models to get the exact feature set needed.
VBS-HDIP-508POE (POE)
3G Receiver
- Decodes a 4K or lower source device from network & converts to HDMI
- Supports HDCP 2.2
- Built-in video scaler
- Video wall
- Image Push
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232, CEC, and IR* control
VBS-HDIP-509POE (POE)
3G Daisy-Chain Receiver
- Decodes a 4K or lower source device from network & converts to HDMI
- Supports HDCP 2.2
- Network out port for local device or extra Receivers
- Built-in video scaler
- Video wall
- Image Push
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
VBS-HDIP-518AVP (POE)
3G+ A/V Pro Receiver
- Decodes a 4K or lower source device from network & converts to HDMI
- Supports HDCP 2.2
- Built-in video scaler
- Video wall
- Image Push
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
- CEC control of sources
- USB 2.0
- KVM Supported
- Stereo audio output 3.5mm with adjustable delay
Build a 4K & Ultra HD matrix using the Third Generation of Just Add Power Transmitters and Receivers. Distribute HDCP 2.2 content to multiple displays HDMI 2.0 or otherwise over a 1Gb network. The built-in scaler on the Receiver allows for seamless display on both 1080p and 4K screens. Mix and match 3G, 3G+AVP, 2GΩ/3G, and 2GΩ/3G+ models to get the exact feature set needed.
VBS-HDIP-505POE (POE)
2G/3G 1080p Receiver
- Compatible with both 2G and 3G systems
- Decodes a 1080p or lower source device from network & converts to HDMI
- Supports HDCP 1.4
- Built-in video scaler
- Video wall
- Image Push
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
VBS-HDIP-515POE (POE)
2G/3G+ 1080p Receiver
- Compatible with both 2G and 3G systems
- Decodes a 1080p or lower source device from network & converts to HDMI
- Supports HDCP 1.4
- Built-in video scaler
- Video wall
- Image Push
- Image Pull
- Instant-Seamless switching
- PoE
- Supports multi-channel including high-resolution digital audio formats
- RS232 or IR* control of sources
- CEC control of sources
- USB 2.0
- KVM Supported
- Stereo audio output 3.5mm with adjustable delay
VBS-HDMI-RS1U
Razor Shelf Accessory Device
1U Rack Shelf
VBS-HDIP-IRD
10' IEC Cable
System Comparison |
|||||
|---|---|---|---|---|---|
| Feature | 2GΩ Omega | 3G Ultra | MaxColor | ||
| Minimum Cabling | Cat5e | Cat5e | Cat5e | ||
| 4K video | 4K30 | 4K60 | |||
| 1080p video | X | X | X | ||
| Display-side video scaler | X | X | X | ||
| Portrait/flipped displays | X | X | |||
| All audio formats including Dolby Atmos and DTS:X | X | X | X | ||
| Dolby Digital 5.1 downmix to 2-channel | X | ||||
| Stereo audio extraction | X | X | X | ||
| HDMI version | 1.4 | 2.0 | 2.0b | ||
| HDCP version | 1.4 | 2.2 | 2.2 | ||
| Maximum bandwidth | 400Mbps | 850Mbps | 950Mbps | ||
| 2G Mode for Backwards Compatibility *2GΩ and 3G devices in 2G Mode behave the same as 2G devices |
X | X | |||